Lutron Sues Legrand, QMotion over Multiple Lighting and Shade-Control Patents
In lawsuit, Lutron claims Legrand and its subsidiaries (Watt Stopper, Pass & Seymour, QMotion) infringed on patents involving wallbox dimmers, fluorescent lighting controls and remote-control form factors that resemble Lutron's Pico remote.
Also named in the suit are Legrand subsidiaries Pass & Seymour, Watt Stopper and Current Products Corp, dba QMotion.
Subsequent to the original lawsuit filed in August 2017, Lutron dismissed QMotion from the lawsuit without prejudice, meaning Lutron can sue again and the dismissal does not imply non-infringement.
“As a competitor that Lutron has previously sued for patent infringement,” Lutron claims in the suit, “Legrand is well aware of Lutron’s portfolio of active patents.”
Indeed, Lutron has sued and settled with most of the key manufacturers of lighting controls that contain wireless transmitters within the wallbox dimmers.
The following are the patents that Lutron alleges Legrand has infringed.
Two-wire dimmer circuit for a screw-in compact fluorescent lamp
#8,242,714, August 14, 2012
#8,704,459, April 22, 2014
Fluorescent bulbs require a ballast for proper illumination, and the ballasts traditionally have been too large to incorporate into the fixture itself. Instead, the ballasts tend to reside in a separate junction box. Today, however, screw-in fluorescent bulbs are sold with integral ballast circuits built in.
“Since the screw-in compact fluorescent lamps have different operational characteristics than incandescent lamps, the dimmer circuits used for the screw-in incandescent lamps are not able to appropriately control the screw-in compact fluorescent lamps.”
Lutron’s patent describes a dimmer switch that can be used to control fluorescent or incandescent bulbs with the flip of a dip switch or automatically.
Lutron claims these Legrand products infringe on the patents: Adorne ADTP703TU and ADTP703H lines; Radiant RH703PTU line; and Harmony H703PTU line.
A dimmer switch for controlling the intensity of a dimmable screw-in compact fluorescent lamp provides smooth dimming of the fluorescent lamp and prevents flickering of the lamp due to multiple re-strikes. The dimmer switch prevents multiple re-strikes by avoiding multiple firings of a controllably conductive switching device of the dimmer circuit by limiting the high-end light intensity of the fluorescent lamp. Specifically, the dimmer switch limits the length of a conduction interval of the controllably conductive switching device to less than approximately 75% of each half-cycle. The dimmer switch may include a user-accessible adjustment actuator for changing the dimmer switch between an incandescent operating mode and a screw-in compact fluorescent mode. The dimmer switch may also be operable to automatically change the dimmer switch between the incandescent operating mode and the screw-in compact fluorescent mode by detecting the occurrence of the multiple firings of the controllably conductive switching device.
System for control of devices
#6,803,728, October 12, 2004
The crux of this patent revolves around status feedback for a two-way control system. A control device like a keypad sends a command to a hub, and the hub passes the command to the dimmers. The keypad delivers status reports back to the hub, which disseminates the feedback to keypads and other controllers to ensure the controllers are synced with the dimmers.
Lutron claims Legrand infringes on the patent with its QMotion remotes, including the ZigBee Multi Channel Remote, Range Extender and controlled devices such as ZigBee HA1.2 shades.
A wireless control system for lighting or the like has a central processor that receives commands from keypads and other control devices, and sends commands to dimmers and other controlled devices. The central processor also receives status reports from the dimmers and sends updates to the keypads, in order to ensure that displays on the keypads are up to date.
Programmable wallbox dimmer
#7,663,325, February 16, 2010
Programming a dimmer via onboard LEDs. The programmer jumps through a few hoops by using the air-gap switch and a combination of taps on the dimmer toggle to enter the programming mode. Then the user cycles through the LEDs via the toggle to program select features for the dimmer. For example, the second LED might represent the mode for fade times. The programmer refers to a menu that explains how to program the fade time using the dimmer toggle. The settings are stored in the dimmer itself.
Lutron claims Legrand infringes with its Adorne ADWR700RMTU, ADTP700RMTU lines and the Radiant LC2101 line.
A programmable wallbox dimmer is disclosed. Upon entering a programming mode, the dimmer presents a main menu from which the user may select one or more features to program. The user may scroll through a list of programmable features by actuating the dimmer's raise/lower intensity actuator. The user may select a highlighted feature by actuating the dimmer's control switch. The dimmer may enter a value selection mode that is associated with the selected feature. In the value selection mode, the user may scroll through a list of features that define the selected feature by actuating the dimmer's raise/lower intensity actuator. The user may select a value for the selected feature. The selected value may be stored in the dimmer's memory.
Wireless battery-powered remote control having multiple mounting means
#9,024,800, May 5, 2015
Remote control for a wireless load control system
#9,361,790, June 7, 2016
These patents appear to be little more than the form factor of Lutron’s Pico remote, being a battery-powered wireless controller that slips into a wall-mounted holder about the size of a typical light switch and faceplate. The remote can fit into a standard Decora faceplate.
Lutron claims Legrand infringes with its Qmotion remotes for motorized shades, including the Gen 3 Single Channel Remote, QdR Gen 3 Multi Channel Remote, ZigBee Multi Channel Remote and the QMotion Drapery Remote.
A remote control for a wireless load control system, the remote control comprising: a housing having a front surface and an outer periphery defined by a length and a width; an actuator provided at the front surface of the housing; a wireless transmitter contained within the housing; and a controller contained within the housing and coupled to the wireless transmitter for causing transmission of a wireless signal in response to an actuation of the actuator, the wireless transmitter and the controller adapted to be powered by a battery contained within the housing; wherein the length and the width of the housing are slightly smaller than a length and a width of a standard opening of a faceplate, respectively, such that the outer periphery of the housing is adapted to be received within the standard opening of the faceplate when the housing and the faceplate are mounted to a vertical surface.
2019 State of the Industry Special Report - CE Pro Download
The custom electronics industry saw a healthy 8 percent growth rate in 2018, down slightly from the blazing 11 percent growth in 2017 but still admiringly strong. Our 2019 State of the Industry indicates that readers expect to see even more growth in 2019. Get your copy today.
Julie Jacobson, recipient of the 2014 CEA TechHome Leadership Award, is co-founder of EH Publishing, producer of CE Pro, Electronic House, Commercial Integrator, Security Sales and other leading technology publications. She currently spends most of her time writing for CE Pro in the areas of home automation, security, networked A/V and the business of home systems integration. Julie majored in Economics at the University of Michigan, spent a year abroad at Cambridge University, earned an MBA from the University of Texas at Austin, and has never taken a journalism class in her life. She's a washed-up Ultimate Frisbee player currently residing in Carlsbad, Calif. Email Julie at firstname.lastname@example.org
Control & AutomationADT Ends Pulse, Adds Command & Control, Pauses Alexa Guard, Plots DIY
SnapAV Acquires MRI, Adding 4 NE Locations to Growing Distribution Empire
Biophilia and the Reason Smart-Home Pros Can Own the Wellness Category
Rayva Home Theater Helps Win Over Client, Elevates Brilliant AV Installation
Product Briefs: Sonos Joins D-Tools i3; Luxul Firmware; WiSA Certified Klipsch Speakers; McIntosh
View more on Control & Automation