ATSC 3.0 Standard Approved, Technicolor SL-HDR1 Proposal Expected Part of Standard
With approval from the Advanced Television Systems Committee (ATSC), Technicolor's SL-HDR1 standard moves a step closer to adoption as part of the ATSC A/341 video standard, which was recently approved and announced at CES 2018.
Closing out the 2017 calendar year, the Advanced Television Systems Committee (ATSC) approved Technicolor's SL-HDR1 amendment to pave the way for the standard's inclusion in the group's existing ATSC A/341 standard.
At CES 2018, ATSC took its state-of-the-art broadcast standard a step further by announcing the adoption of its ATSC 3.0 suite of next-generation TV standards.
According to the Committee, the adoption of its ATSC 3.0 standard is the culmination of a five-year process to "rethink over-the-air broadcast television service in the Internet age."
ATSC states the newly approved standard provides the broadcast community with a choice of options, including Ultra HD 4K, immersive audio and interactive services that utilize web and broadcast connections.
"Our suite of ATSC 3.0 standard paves the way for a new kind of television service—one that is far more flexible and adaptable than previous standards. ATSC 3.0 will bring historic innovations to broadcasters and to viewers, from robust transmission to immersive audio, and from 4K Ultra HDTV, to interactive services and more," states Mark Richer, president, ATSC.
"The 20 individual standards that comprise the release of ATSC 3.0 will give broadcasters the ability to utilize new transmission methods and finally bring together innovations in both over-the-air and broadcast services."
Technicolor SL-HDR1 Standard Expected to be ATSC 3.0 Provision
Addressing the popular video technology high dynamic range (HDR), Technicolor proposed its SL-HDR1 standard for inclusion in the ATSC 3.0 format.
Through the ATSC's approval of SL-HDR1, which occurred this past December, the HDR standard is expected to be a part of the newly announced ATSC 3.0 broadcast standard.
Technicolor explains that SL-HDR1 is a single-layer solution that supports compatibility with all non-HDR equipment.
The HDR standard bridges the gap between single dynamic range (SDR) and HDR, and it enables broadcasters to transmit a signal that homeowners with standard televisions and HDR-enabled televisions to receive broadcast transmissions.
"SL-HDR1 technology allows a broadcaster to deliver a signal that can be rendered as SDR, as well as HDR. The bitstream is SDR and it contains an extra packet, which enables HDR reconstruction," states Alan Stein, vice president of technology and standards, Technicolor.
"This packet is metadata that in essence, reconstructs the HDR signal as it was captured or constructed. The metadata is encapsulated in the video bitstream. Devices that don't support HDR will simply ignore that part of the bitstream, while devices that support SL-HDR1—for example, LG TVs—read the metadata, decode it and reconstruct HDR video."
Dolby AC-4 Format Provides ATSC 3.0 with Immersive Audio
In addition to its review of video technologies to include in its ATSC 3.0 format, the ATSC has also been evaluating companion audio formats.
As part of its evaluation process the ATSC has examined audio technologies that include the MPEG-H Audio format, and Dolby's AC-4 audio system.
On Feb. 23, 2017 the ATSC released its "ATSC Standard: A/342 Part 2, AC-4 System" report that includes an outline of Dolby's AC-4 codec as part of the ATSC 3.0 standard.
Summarizing the use of Dolby AC-4 as part of the 3.0 standard, the ATSC says the Dolby solution is a scalable and flexible set of tools that enables efficient production, distribution and delivery of consumer broadcast content.
AC-4 supports traditional multichannel audio content, object-based surround sound, intelligent loudness management, dynamic range control, and high sampling frequencies up to 24-bit/192kHz.
The ATSC does emphasize, however that "part one of this standard constrains sampling frequency to 48kHz ... the AC-4 bitstream is structured such that bitstreams with high-sampling frequencies can be decoded to PCM at 48kHz without any penalties."
ATSC 3.0 Web Elements Alert Consumers
Looking ahead, Richer says the ATSC is preparing to deploy the 3.0 format, including its Internet-based options this year.
Gordon Smith, president and CEO of the National Association of Broadcasters (NAB), points out the broadcast market is ready to take advantage of the full breadth of ATSC's 3.0 technologies to help entertain the public.
"Broadcasters stand ready to take full advantage of the capabilities of the new voluntary standard, which can seamlessly mix both broadcast and broadband content to deliver enhanced information and entertainment for our viewers," says Smith.
"One of the most compelling new features of ATSC 3.0 wil be the rich media emergency alerting capabilities, allowing local broadcasters to target viewers in specific areas in their markets when disaster looms. Our viewers depend on their local stations for breaking news and information, and ATSC 3.0 gives local stations the ability to merge resources and information like never before."
Gary Shapiro, president and CEO of the Consumer Technology Association (CTA), notes the ATSC 3.0's combination of state-of-the-art video technologies, along with audio and interactive content, will offer the public a new way to experience television.
"Coupled with the latest innovations in display and audio technology, Next Gen TV, powered by ATSC 3.0 will offer a breathtakingly immersive viewing experience with access to an array of innovative and interactive information services," adds Shapiro.
"While we forecast sales of digital displays to increase in 2018, we anticipate future growth will be driven in part by this exciting new technology and the amazing feature it brings."
7 Clever Ways to Hide Home Technology - CE Pro Download
Most technology products are not that visually appealing. Black boxes and tangled wires do not add to the character of a high-end smart home project. Luckily, our integrator readers have a number of clever solutions so these components don’t have to be visible in your next project.
Bob is an audio enthusiast who has written about consumer electronics for various publications within Massachusetts before joining the staff of CE Pro in 2000. Bob is THX Level I certified, and he's also taken classes from the Imaging Science Foundation (ISF) and Home Acoustics Alliance (HAA). Bob also serves as the technology editor for CE Pro's sister publication Commercial Integrator. In addition, he's studied guitar and music theory at Sarrin Music Studios in Wakefield, Mass., and he also studies Kyokushin karate at 5 Dragons in Haverhill, Mass. Have a suggestion or a topic you want to read more about? Email Robert at email@example.com
Follow Robert on social media:
Home TheaterSnapAV Acquires Volutone, Adding 7 Distributor Locations
Product Briefs: Atlona, Josh.ai; Luxul Self Healing; Naim adds AirPlay 2; PS Audio OS; SnapAV
American Audio & Video Introduces $650 and $900 Thorens Turntables
Wounded U.S. Army Captain Nick Vogt Receives Custom ELAN Smart Home
Video Maven John Bishop: MicroLED Claims are ‘Fake News’
View more on Home Theater
Take Our Latest QuizzesHow Well Do You Understand Ethernet Cables and Connectors?
Quiz: Is Your Company Performance Above or Below Average?
How Much Do You Know About Cell Phone Signal Boosters?
How Efficient Is Your Service Department? Take the Quiz
5G and the Need for Cellphone Signal Boosters—Do You Know Enough?