Worst DIY Installs Ever Part 7
10 Must-Have Products for Your Next Install
6 Amazing High-End Home Theaters
8 Awesome Turntables for Spinning Vinyl
Print
Email
Share
Audio Technica AT150ANV limited edition VM cartridge
Among the design elements incorporated into the limited edition, 50th anniversary phono cartridge is the unit's Micro Linear stylus tip and machined aluminum housing.
The new, limited edition AT150ANV moving-coil phono cartridge from Audio Technica carries an MSRP of $799.
With the vinyl format bigger than ever, long-time category supporters such as Audio Technica (AT) are benefiting through the increased interest in their respective products now that consumers are spinning records again.
One product that is receiving a lot of interest from Audio Technica is the AT 150ANV moving-coil phono cartridge. The product was released to celebrate its 50th anniversary as a company, and AT says the cartridge combines traditional phono cartridge design elements with new technologies to provide music lovers with a product that taps into the best qualities of yesterday and today. According to Audio Technica, the AT150ANV employs a Micro Linear stylus tip that's mounted to a solid boron cantilever. The cartridge also uses a machined-aluminum housing and dampening materials to eliminate resonances to ensure musical clarity and resolution.
Audio Technica states the AT150ANV's frequency response is 10Hz to 23kHz, and its output is rated at 4mV. In addition, the company says its vertical tracking force is 1.2 to 1.8 grams, and its recommended load impedance is 47k ohms.
One product that is receiving a lot of interest from Audio Technica is the AT 150ANV moving-coil phono cartridge. The product was released to celebrate its 50th anniversary as a company, and AT says the cartridge combines traditional phono cartridge design elements with new technologies to provide music lovers with a product that taps into the best qualities of yesterday and today. According to Audio Technica, the AT150ANV employs a Micro Linear stylus tip that's mounted to a solid boron cantilever. The cartridge also uses a machined-aluminum housing and dampening materials to eliminate resonances to ensure musical clarity and resolution.
Audio Technica states the AT150ANV's frequency response is 10Hz to 23kHz, and its output is rated at 4mV. In addition, the company says its vertical tracking force is 1.2 to 1.8 grams, and its recommended load impedance is 47k ohms.
Subscribe to the CE Pro Newsletter
No recent entries filed under Audio.
Article Topics
Audio · Accessories · Vinyl · Audio Technica · Records · Moving Magnet Phono Cartridge ·About the Author
Robert Archer, Senior Editor, CE Pro
Bob is an audio enthusiast who has written about consumer electronics for various publications within Massachusetts before joining the staff of CE Pro in 2000. Bob is THX Level I certified, and he's also taken classes from the Imaging Science Foundation (ISF) and Home Acoustics Alliance (HAA). In addition, he's studied guitar and music theory at Sarrin Music Studios in Wakefield, Mass.
Post a comment
Commenting is not available in this weblog entry.