Home Theater

Hands On: Elura By Sonance Speakers Make a Loud Statement

WAVE Electronics makes its debut into the architectural loudspeaker category with its Elura by Sonance brand of performance loudspeakers.

Looking at the Elura S6.5 IW in-wall loudspeaker, WAVE says the 8-ohm loudspeaker provides a rated frequency response of 45Hz to 20kHz, and an efficiency rating of 91dB.

More about Elura

Elura speakers are distributed by WAVE Electronics. Established in 2002, WAVE is the largest, fastest growing, independent distributor in the East and Southern regions....
Elura Logo
  Elura Company Info
Robert Archer · April 20, 2016

Loudspeakers are arguably the most competitive category in the entire world of consumer electronics, so if a new company enters the market the only way it can ensure success is to produce the very best possible products.

Of course that is easier said than done, and putting the ego portion of this equation to the side, there are many talented engineers struggling to make it in consumer audio.

Succeeding where others have failed however is the Houston, Texas-based company WAVE Electronics. Formed in 2002, the company entered the custom installation industry as a distributor, but over the past several years it has diversified its capabilities by adding solutions such as its own brand of loudspeakers to its product portfolio.

Entering the loudspeaker category a few years ago, the company has evolved its product line. Today it is working with the respected California audio manufacturer Sonance to produce its new Elura by Sonance line of loudspeakers.

Developed as a premium but affordable range of solutions, the Elura line of products features a choice of speakers, including the Elura S6.5 IW in-wall loudspeaker which we got the chance to test out here at CE Pro. This particular speaker employs a two-way design with a 6.5-inch paper/dry-carbon fiber cone with rubber surround, and a 1-inch ferrofluid-cooled, silk pivoting dome tweeter. The amp friendly, 8-ohm speaker is 91dB efficient, and it produces a rated frequency response of 45Hz to 20kHz.

Setting up the speakers takes a matter of minutes. Using the supplied cutout template, dealers just need to trace the pattern and cut the hole. With the hole cut and the speaker cables available, the next step is to connect the speaker cables to the speakers’ binding posts. From that point it requires one hand to steady the speaker in the cutout and another hand to secure the four-bolt locking system into place using a standard drill and Phillips drill bit. Finishing the installation, the bezel-less speaker uses powerful magnets to lock the speaker grilles into place.

Useful options such as the pivoting tweeter and boundary compensation/tweeter attenuation output adjustments allow installers to tailor the sound of the speakers to each installation environment, and setup a “toe-in” setting to help the speakers produce audiophile stereo image characteristics.

Focusing specifically on the Elura S6.5’s market applicability, installers will be able to use the small-footprint speaker for whole-house audio and home theater applications, and just about any source of amplification.

Installers can expect the speaker to produce a balanced soundstage with a solid amount of low-end information and top-end extension. In addition, the speakers image well producing a focused audio soundscape that also fills the room.



2019 State of the Industry Special Report - CE Pro Download

The custom electronics industry saw a healthy 8 percent growth rate in 2018, down slightly from the blazing 11 percent growth in 2017 but still admiringly strong. Our 2019 State of the Industry indicates that readers expect to see even more growth in 2019. Get your copy today.




  About the Author

Bob is an audio enthusiast who has written about consumer electronics for various publications within Massachusetts before joining the staff of CE Pro in 2000. Bob is THX Level I certified, and he's also taken classes from the Imaging Science Foundation (ISF) and Home Acoustics Alliance (HAA). Bob also serves as the technology editor for CE Pro's sister publication Commercial Integrator. In addition, he's studied guitar and music theory at Sarrin Music Studios in Wakefield, Mass., and he also studies Kyokushin karate at 5 Dragons in Haverhill, Mass. Have a suggestion or a topic you want to read more about? Email Robert at rarcher@ehpub.com

Follow Robert on social media:
Twitter

Robert also participates in these groups:
LinkedIn · Google+

View Robert Archer's complete profile.



  Article Topics


Home Theater · Speakers · Loudspeakers · Architectural · Audio/Video · Distributed Audio · Outdoor AV · Products · Media · Videos · Elura · Sonance · WAVE · All Topics
CE Pro Magazine

Read More Articles Like This… With A Free Subscription

CE Pro magazine is the resource you need to keep up-to-date on the latest products, techniques, designs and business practices. Subscribe today!

Subscribe Today!

Comments

Posted by RobertsTheater on October 4, 2016

I used to buy Polk speakers from Wave until one of the sales guys converted me to Elura.
It’s a great product for less money than Polk, I am glad they converted me to the product.

Posted by Robert Archer on September 30, 2016

Thank you Ainslie, I enjoyed reviewing your product and working with you. I look forward to working with you on future product reviews.

Posted by Ainslie WAVE on September 29, 2016

It was a pleasure to work with the famous Bob Archer. The Elura team was excited to have our speakers reviewed by a fellow audiophile. We will be sending more Elura gear to Bob in the future to torture and review.

Posted by Ainslie WAVE on September 29, 2016

It was a pleasure to work with the famous Bob Archer. The Elura team was excited to have our speakers reviewed by a fellow audiophile. We will be sending more Elura gear to Bob in the future to torture and review.

Posted by Robert Archer on September 30, 2016

Thank you Ainslie, I enjoyed reviewing your product and working with you. I look forward to working with you on future product reviews.

Posted by RobertsTheater on October 4, 2016

I used to buy Polk speakers from Wave until one of the sales guys converted me to Elura.
It’s a great product for less money than Polk, I am glad they converted me to the product.