Just Add Power to Debut 2G+AVPro at ISE 2015
Just Add Power’s 2G+AVPro HD over IP devices with licensed Dolby DSP chipset on-board transmitter to make European debut at ISE 2015.
Co-sharing HDanywhere’s stand (5-R114) at ISE, Just Add Power, the global leaders in HD over IP video distribution, will be letting show goers check out their new 2G+AVPro transmitter and receiver models. Thanks to having a licensed Dolby DSP chipset on board, the AVPro transmitters allow integrators to get 2.0 channel stereo audio at all stereo zones and 5.1 multi-channel audio at every multi-channel zone simultaneously. AVPro transmitters also boast fresh audio features that are particularly useful for video conferencing and paging applications.
Whereas the 2G/2G+ transmitters can only send one audio format at a time, the Dolby DSP chipset on board the AVPro transmitters transforms Dolby 5.1 audio to Dolby PLII format and sends it over the network. The Dolby PLII format is recognized as Stereo 2.0 audio by regular HDMI devices but an AVR in a multi-channel audio zone is able to recognize the Dolby PLII and convert it back to 5.1. The result is that you simultaneously get 2.0 stereo audio in all stereo zones and 5.1 in all multi-channel zones. No fiddling with EDID settings or additional signal management is required, as can be the case with fixed format video matrixes.
This mixed mode audio format works on all the 2G/2G+/2G+AVPro receivers running firmware A5.30 or later, so integrators do not have to pair AVPro receivers with AVPro transmitters in order to receive the benefits of the Dolby DSP chipset. The 2G+AVPro transmitters and receivers are backwards compatible with all the other 2G and 2G+ models, allowing integrators to implement the AVPro features only where needed without having to replace the entire system with AVPro models.
Additionally the AVPro transmitters have an integrated audio mixer on board, which allows the three audio inputs (HDMI, Stereo, and Mic) to be independently mixed / muted via a control system. Both the AVPro transmitter and receiver models have a variable audio output on the stereo out port that can be adjusted up or down via a control system. They also both feature an integrated ground loop isolator.
Ed Qualls, CEO of Just Add Power, commented on the development of AVPRo, saying “with HDMI over IP being used in a multitude of applications, installers want the ability to add and extract audio for paging, injecting and distributing analog audio. Installers are also increasingly requesting audio extraction for integrating with video conferencing systems. The 2G+AVPro HD over IP solutions deliver all of this requested functionality whilst adding Dolby certification and an IP controlled variable analog audio-out, giving a true down mix from HDMI Dolby audio to stereo analog with easy control.”
2G+AVPro complete feature set:
- Supports lossless 1080p video
- Video Wall support- integrate anything from 2x2 to a 16x16 video wall within the HD over IP network of devices.
- Support for Stereo 2.0 and Dolby 5.1.
- Dolby DSP chipset on-board TX enables simultaneous Stereo and Multi-Channel audio from a HDMI source.
- HDMI audio, Line input and Mic input on TX
- IP controlled Variable Analog audio output with delay adjustment (up to 170ms)
- HDMI pass-through on TX
- RS232 (two-way) over IP
- CEC over IP (two-way)
- USB 2.0 over IP
- PoE TX and RX models available
- Image Push: push one or multiple JPEGS onto the receivers. This image can then shown during system downtime as opposed to a blank screen.
- Image Pull: pull a JPEG from the receivers for live image feedback
- Image Pause: freeze the video on one or more receivers whilst the other receivers continue to show the live video content.
- Custom On Screen Messaging: set up a customised error message on any or all of the HD over IP devices on the network during downtime.
To learn more about HD over IP from Just Add Power and to see a demo visit Stand 5-R114 at ISE. Just Add Power is exclusively available to purchase in the UK and Ireland from HD Connectivity Group. Call (+44) (0)1684 576 348 or email firstname.lastname@example.org for pricing.
Save $100 When You Enter the CEPro BEST Product Awards Before May 24
Every year our editors recognize the most advanced products in the professional installation market. Wouldn't you like to tell your customers that your products are among this exclusive group? Enter the CEPro BEST Product Awards and give your sales team something to shout about. Early bird pricing ends May 24.
EventsEarly Bird Entry Submissions for 2019 CE Pro BEST Product Awards Close Soon
CE Pro BEST Project Awards Early Bird Entry Deadline Approaching
Experts Offer 5 Tips to Improve Your Audio Demos
Intuitive Interface Is Key to Lighting, Energy Storage/Management Systems
10 Ostentatious Loudspeakers from 2019 High End Munich Audio Show
View more on Events