6 Pop Songs Great for Audio Demos
Worst DIY Installs Ever Part 7
10 Must-Have Products for Your Next Install
6 Amazing High-End Home Theaters
Print
Email
Comments (0)
Share
Sencore SoundPro SP-495 Delivers Quick, Accurate Audio Analysis
Acoustic/sound analyzer provides 30 troubleshooting and analysis tools.
Sencore's SP-495 SoundPro acoustic/sound analyzer, dubbed "The Audio Consultant," gives you all the tools you need to optimize your client's home theater audio.
With the implementation of a powerful DSP engine, it is a high resolution, highly accurate precision toolbox.
Features of the SP-495 include:
As each function is selected, loaded into internal memory and executed, the analyzer takes on a completely new personality. Over 25 different test functions are available.
In its simplest form, the SP-495 is a 1/3 octave real-time analyzer that will let you to walk around and see what's happening in the room.
The SP-495 is also a signal generator that will enable you to drive your client's system with pink noise (equal energy per octave), pure tones or anything else you would like.
Once you can "see" the problem(s), if you elect to treat them, the SP-495 has 30 different personalities representing different analysis tools to let you troubleshoot efficiently.
Some common ones are:
The logical layering of the menus begins with the highest level, which lets you select the flavor of measurement you want to start with. The choices are: SPL, Acoustics, TDA (time delay analysis), Noise Tools, Speaker measurements, Tech Bench and Utility functions.
Digging deeper into the menu tree provides you with every imaginable tool on that menu's topic. The top and bottom tool bars provide access to often-used controls, and the central control knob has a positive feel while navigating the rich menu tree.
The SP-495 is powered by a lithium battery and comes with a line power adaptor/charger and a road-worthy carrying bag. The meter comes with an excellent 124-page manual.
With the implementation of a powerful DSP engine, it is a high resolution, highly accurate precision toolbox.
Features of the SP-495 include:
- precision 24-bit A/D and D/A converters
- internal 64-bit processing
- fully balanced, low noise, high-resolution input and output amplifier gain stages
As each function is selected, loaded into internal memory and executed, the analyzer takes on a completely new personality. Over 25 different test functions are available.
In its simplest form, the SP-495 is a 1/3 octave real-time analyzer that will let you to walk around and see what's happening in the room.
30 Functions Highlight Acoustic Analysis Tool
The SP-495 is also a signal generator that will enable you to drive your client's system with pink noise (equal energy per octave), pure tones or anything else you would like.
Once you can "see" the problem(s), if you elect to treat them, the SP-495 has 30 different personalities representing different analysis tools to let you troubleshoot efficiently.
Some common ones are:
- FFT precision sound analysis
- an Energy Time Graph mode
- Early Decay time measurement
- near-field speaker EQ
- a phase meter
- a distortion meter
- an Audio Scope
- speaker polarity detection
- an impedance sweep function
- a cable tester
- and, of course, a simply SPL meter
The logical layering of the menus begins with the highest level, which lets you select the flavor of measurement you want to start with. The choices are: SPL, Acoustics, TDA (time delay analysis), Noise Tools, Speaker measurements, Tech Bench and Utility functions.
Digging deeper into the menu tree provides you with every imaginable tool on that menu's topic. The top and bottom tool bars provide access to often-used controls, and the central control knob has a positive feel while navigating the rich menu tree.
The SP-495 is powered by a lithium battery and comes with a line power adaptor/charger and a road-worthy carrying bag. The meter comes with an excellent 124-page manual.
Post a comment