Control & Automation

Z-Wave Scores Huge UL Win for Security, a First for Mesh Technology

Latest super-secure Z-Wave technology mitigates smart-home hacking; will achieve UL 1023 compliance for intrusion, giving the home automation standard an edge in powering some 20 million security sensors and alarm panels each year.

Z-Wave Scores Huge UL Win for Security, a First for Mesh Technology
With UL 1023 compliance, Z-Wave could become the de facto home automation standard for security.

Julie Jacobson · February 18, 2016

Z-Wave, arguably the leading home automation technology today, may soon become the top home-security protocol as well. UL has approved the latest Z-Wave protocol for UL 1023 compliance, giving Z-Wave the green light for professional alarm installations, and mitigating consumer concerns about hacking the smart home.

Today, more than 20 million security sensors, alarm panels and other security devices are installed each year, primarily by security professionals who must install UL-certified products. Most of the UL-compliant sensors utilize one-way radios operating at 300/400 MHz frequencies. The standard for decades, these low-cost radios offer long-range communications, long battery life and very secure transmission.

But the UL-listed sensors are single-purpose, one-way and mostly redundant because security dealers are installing multi-purpose sensors like Z-Wave right next to them. The UL security sensors are required for life-safety applications, while the Z-Wave sensors provide lifestyle benefits and feedback.

If only the Z-Wave sensors could achieve UL-compliance for life-safety (burglary), they could replace traditional security sensors altogether. That dream is becoming reality.

A More Secure Z-Wave vs. ZigBee

Sigma Designs (Nasdaq: SIGM), the owner of Z-Wave technology, put the gears in motion last year when it launched the new Z-Wave Security 2 (S2) framework for next-gen Z-Wave products. That framework was developed in cooperation with UL, with 1023 compliance in mind.

Today, Sigma announced that its new Z-Wave transceivers (models ZM5101, ZM5202, and ZM5304) with protocol SDK version 6.60 have been evaluated to UL’s standards for home security. The products feature anti-jamming and AES 128-bit encryption provisions like today’s less-capable UL devices.

“Now you can standardize on one radio for both security and convenience,” says Avi Rosenthal, VP of security and control for Nortek Security & Control, developer of 2Gig alarm systems and a leading manufacturer of Z-Wave devices.

“Every device from a door/window sensor to a sophisticated door lock will be part of the secure environment. The consumer doesn’t have to worry about any of it."
— Nortek VP Avi Rosenthal,
Z-Wave Alliance Board Member

A board member of the Z-Wave Alliance, Rosenthal says UL has never certified mesh-networking products for life-safety. While rival home-automation protocol ZigBee has some UL-compliant life-safety devices, those products have mesh-networking disabled, resulting in a short-range, point-to-point solution, according to Rosenthal.

In the case of new UL-compliant Z-Wave devices, “This is a true-blue mesh network, exactly how you would expect it to work,” Rosenthal says.

Even moving forward, ZigBee might have trouble achieving the same UL status as Z-Wave. ZigBee operates in the crowded 2.4 GHz band, which is prone to unintentional signal-jamming from Wi-Fi, Bluetooth and myriad other technologies on the home network.

The 2.4 GHz noise can trigger false alarms in a security system, which can be challenging to detect.

Operating in the 900 MHz band, Z-Wave battles much less traffic on the home network, so the technology can better distinguish between real and false alarms.

Z-Wave’s two-way sensors feature “Jamming Detect,” a mechanism added to the protocol to satisfy UL’s stringent interference protection requirements. 

Prospects for UL-Compliant Z-Wave

It seems the opportunities for Z-Wave cannot be overstated in the UL announcement.

“There has never been an end-to-end encrypted protocol for life-safety,” Rosenthal says. “Every device from a door/window sensor to a sophisticated door lock will be part of the secure environment. The consumer doesn’t have to worry about any of it. It is a single, compatible standard for convenience and security.

According to the Z-Wave Alliance, Z-Wave is included in over 90 percent of professionally installed security systems. Opening up the security sensor market for Z-Wave devices more than doubles the total available market being addressed, according to the group.

UL-compliant Z-Wave products probably won’t hit the market until Q4 of this year, according to Rosenthal, but existing Z-Wave products that employ the newer 500-Series Sigma chipset should be firmware-upgradeable for UL compliance.

Will we still need the industry-standard 300-Mhz sensors? Probably not, Rosenthal says.

Today’s 300/400 MHz security sensors are cheaper, but much of that has to do with economies of scale, according to Rosenthal. The price differential is shrinking already, and once a high volume of Z-Wave radios are used as security sensors, any price advantage will disappear.

Furthermore, alarm panels will no longer have to support multiple radio platforms, further bringing down the price of a Z-Wave-centric system.

The long range of 300/400 MHz sensors is moot when compared to Z-Wave’s mesh-network capabilities.

The only lingering advantage to 300/400 MHz is battery life, but here again Rosenthal says Z-Wave is approaching parity. Currently, the old one-way standard gets about 2x battery life compared to Z-Wave, “but we’re improving,” he says.

For Nortek’s part, Rosenthal says the company’s new 2Gig GC3 alarm panel is being built with UL compliance in mind. New communications methodology must be implemented to ensure UL-sanctioned Z-Wave transmissions for life-safety, not just lifestyle.

“We’ve asked UL to bless the way we’ve been doing it,” Rosenthal says.

The new UL certifications are for burglary only, not fire detection.

Press Release, next page

  About the Author

Julie Jacobson, recipient of the 2014 CEA TechHome Leadership Award, is co-founder of EH Publishing, producer of CE Pro, Electronic House, Commercial Integrator, Security Sales and other leading technology publications. She currently spends most of her time writing for CE Pro in the areas of home automation, security, networked A/V and the business of home systems integration. Julie majored in Economics at the University of Michigan, spent a year abroad at Cambridge University, earned an MBA from the University of Texas at Austin, and has never taken a journalism class in her life. She's a washed-up Ultimate Frisbee player currently residing in Carlsbad, Calif. Email Julie at [email protected]

Follow Julie on social media:
Twitter · LinkedIn · Google+

Julie also participates in these groups:
LinkedIn · Google+

View Julie Jacobson's complete profile.

Control & Automation

Mental Health Benefits of Owning a Smart Home
Amazon’s New Custom Smart-Home Service: Who Cares if They’re ‘Sincere’?
CEDIA Dealers Shouldn’t Trust Amazon as Smart-Home Partner, Says Industry Veteran
Amazon Details ‘Custom Home Service’ Featuring CEDIA Smart Home Pros
Veteran Integrator Gives Aprilaire Kudos for Innovation
View more on Control & Automation

  Article Topics

Control & Automation · Automation · Whole House Control · Security · News · Products · 2gig · Nortek · Z-Wave · All Topics
CE Pro Magazine

Not a Magazine Subscriber?
Subscribe Today...It's FREE!!


There are no comments. Be the first to post!
There are no comments. Be the first to post!