New $5,995 Cary Audio SLI-100 Integrated Amp Delivers 100 Watts Per Channel
Operating in a Class AB1 mode, the new $5,995 Cary Audio SLI-100 Integrated Amplifier is designed to provide high levels of transparency to resolve fine musical detail.
Augmenting its range of tube amplifiers, the new Cary Audio the $5,995 SLI-100 Integrated Amplifier delivers high-power capabilities from a quad array of KT150 output tubes running in a push/pull configuration.
Cary Audio says that its latest amp runs in a Class AB1 mode using a negative fixed bias supply to help the amp produce 100 watts per channel.
According to the company, the amp features its latest engineering concepts, along with the best possible parts, "proper circuit topologies" and specially designed output transformers, which are the most important component within an amplifier.
The N.C.-based company explains the SLI-100's negative feedback is derived from the amp's 8-ohm tap on the output transformer secondary, and the preamplifier and power sections highlight its new circuit designs.
"This feedback circuitry is used to reduce the noise floor and improve the speaker damping characteristics," states Cary Audio.
"Only 4dB of feedback is utilized. The phase inverter is a self-balancing split load configuration utilizing the 6SN7 octal base dual triode. The preamplifier circuit is a Series Regulated Push-Pull [SRPP] Class A triode voltage amplification stage direct coupled to the phase inverter. The power supply in the SLI-100 features a 200 percent duty cycle EI laminate power transformer."
Cary Audio SLI-100 Integrated Amplifier Specifications
Taking a closer look at the Cary Audio SLI-100 Integrated Amplifier the product incorporates these features:
- Rated power is 100 watts per channel
- SLI-100 offers a choice of 4- and 8-ohm output taps
- RCA single-ended connections, including a pair of subwoofer outputs
- The SLI-100 offers four pairs of RCA inputs
- The amp uses a pair of 6922 input buffer preamp tubes, along with two 6SN7 pre-driver/phase inverter tubes, and four KT150 output tubes
- 1/4-inch headphone output
- Rated frequency response is 19Hz to 23kHz
- Cary Audio states the amp requires three minutes of warmup time
- The amp features a black powder coated matte finished chassis with a choice of black or silver faceplates and knobs
- The SLI-100 Integrated Amplifier weighs 42 pounds
7 Clever Ways to Hide Home Technology - CE Pro Download
Most technology products are not that visually appealing. Black boxes and tangled wires do not add to the character of a high-end smart home project. Luckily, our integrator readers have a number of clever solutions so these components don’t have to be visible in your next project.
Bob is an audio enthusiast who has written about consumer electronics for various publications within Massachusetts before joining the staff of CE Pro in 2000. Bob is THX Level I certified, and he's also taken classes from the Imaging Science Foundation (ISF) and Home Acoustics Alliance (HAA). Bob also serves as the technology editor for CE Pro's sister publication Commercial Integrator. In addition, he's studied guitar and music theory at Sarrin Music Studios in Wakefield, Mass., and he also studies Kyokushin karate at 5 Dragons in Haverhill, Mass. Have a suggestion or a topic you want to read more about? Email Robert at email@example.com
Follow Robert on social media:
SpeakersdARTS Introduces 5.1 Flyte Home Theater System
Nielsen Data Shows Vinyl Sales Up 14.6% in 2018 Despite Streaming’s Dominance
Hands-On: QSC Premium Business Music Solutions Amps, MP-M Series
Product Briefs: Savant Video Tiler; Luxul Firmware Updates; DTS SoC for TVs; Atlona Dolby Vision
Research: Voice Assistant Adoption Growing Despite Security and Privacy Concerns
View more on Speakers