Dayton Audio MK402 Loudspeaker Plays Down to 60Hz
The two-way Dayton Audio MK402 is designed to provide homeowners with an affordable bookshelf speaker solution.
Known for its affordable loudspeakers, the audio company Dayton Audio is reinforcing its reputation through the release of its MK402 bookshelf loudspeaker.
The newly announced MK402 bookshelf loudspeaker is described by the company as a sophisticated and elegant two-way speaker.
Internally the MK402 bookshelf speaker employs a 3/4-inch silk-dome tweeter, along with a treated-paper 4-inch woofer. Controlling these drivers is a crossover network that utilizes a 2.5kHz first-order low-pass filter and a second-order high-pass filter.
Dayton Audio says the speaker's rear panel features a recessed terminal cup that houses a pair of gold-plated five-way bindings.
According to Dayton Audio, the MK402 bookshelf speaker produces a frequency response of 60Hz to 20Hz, and it says the 4-ohm speaker is also 84dB sensitive.
The speaker comes with a black finish and it is backed with a five-year warranty.
Dayton Audio MK402 Loudspeaker Installation Advice
Helping with the installation process, Dayton Audio recommends to start by placing the speakers directly in front of the primary listening position. The company cautions dealers to avoid hard vertical edges within three-to-four feet of either side of the speaker cabinets, and says to place the speakers about a foot to two feet from the walls.
Utilizing familiar recordings to hear the performance differences, the company states moving the speakers around a few inches to optimize their soundstage.
Ideally, Dayton Audio says the speakers' tweeters should be 10 to 12 feet from the listening area, and when viewed from the main listening seat, the speaker angle should be 30 to 60 degrees.
Dayton Audio emphasizes that during the installation of the speakers, integrators pay attention to the bass because the relation between bass response and room position is highly important to achieve a balanced sound.
"The most common position error involves getting the bass level right for one note, but not for others," says Dayton Audio. "The secret to proper positioning is to keep the worst of these spots from falling on the primary listening position."
Bob is an audio enthusiast who has written about consumer electronics for various publications within Massachusetts before joining the staff of CE Pro in 2000. Bob is THX Level I certified, and he's also taken classes from the Imaging Science Foundation (ISF) and Home Acoustics Alliance (HAA). Bob also serves as the technology editor for CE Pro's sister publication Commercial Integrator. In addition, he's studied guitar and music theory at Sarrin Music Studios in Wakefield, Mass., and he also studies Kyokushin karate at 5 Dragons in Haverhill, Mass. Have a suggestion or a topic you want to read more about? Email Robert at firstname.lastname@example.org
Follow Robert on social media:
SpeakersProduct Briefs: RTI Samsung Driver; Dish, American Airlines; Key Digital Software
$2,199 Marantz 4K Surround Pre-Processor is IMAX Enhanced Certified, Dolby Atmos Ready
Bose Debuts New Smart Speaker ‘Ecosystem’ at CEDIA Expo
Wisdom Audio Insight On-Wall Loudspeakers Debut at CEDIA Expo 2018
Sonance Celebrates 35 Years with More Architectural Speaker Innovation
View more on Speakers
Take Our Latest QuizzesHow Well Do You Understand Ethernet Cables and Connectors?
Quiz: Is Your Company Performance Above or Below Average?
How Much Do You Know About Cell Phone Signal Boosters?
How Efficient Is Your Service Department? Take the Quiz
5G and the Need for Cellphone Signal Boosters—Do You Know Enough?