Recent News

Sunfire, Bob Carver Talk Audio, Intro Products
Audio legend demos Sunfire's latest ventures and discusses audio engineering.
image

Audio legend Bob Carver (right) with EHX marketing manager Demetrios Louloudes.


04.24.2008 — Sunfire is rolling out a slew of new products over the next few months.

Bob Carver, audio legend and founder of Sunfire, and Eric Harper, director of marketing and product development, brought a number of the products to demo for CE Pro and Electronic House.

Harper played several tracks through the TGR-401 7.1 channel receiver. It delivers 150 watts from each of the seven channels and is compatible with Elan’s Ole XL keypad multiroom controller. It will ship in June for about $4,000. 

The 401 series also includes the TGP-401 pre-amp/processor and the TGA-7401 seven-channel amplifier come with the 5401 and 5201 five-channel amps.

The TGP-401 will retail for about $3,500, while the amplifiers will range from the mid $2,000s up to over $4,000.

The company says its new Cinema Ribbon Bi-pole on-wall speaker, the CRM-2BIP, will be the only on-wall bi-pole ribbon speaker on the market.

At 3 5/8 inches deep, it has dual, side-firing ribbons and 400 watts per cabinet. Intelligent Tweeter Shaping allows listeners to adjust control frequencies and tonal balance. They’ll go for about $1,750 per pair and will ship in June.

Harper discussed Sunfire’s HRS (High Resolution Series), which includes satellite speakers with 4.5-inch woofers at $450/each.

He described its installer-friendly setup, which allows for simple clamping without screws. An entire HRS 5.1 system is about $3,100.

Harper also talked about the Power of Three, a marketing program that will allow dealers to leverage the cohesiveness of selling Sunfire, Elan and Homelogic products together.

The program will launch at Elan’s Tech Week ’08, May 13–16 in Lexington, Ken.

Carver Talks Audio Engineering, New Products

Listening to Bob Carver talk about speakers is like listening to Jack Nicklaus talk golf. 

The visit was to introduce new components, but the lasting impression was Carver’s thoughts on audio engineering.

Carver was excited to show off how thin the Subrosa subwoofer is, jumping out of his seat, exclaiming, “I’ve got to show you something.” He pulled out a business card. “This is a normal card!”

Placing the card next to the Subrosa, showing they have the same depth, he reiterated, “This is a normal card!”

Carver’s goal with the Cinema Ribbon compact speakers was to provide as much punch as his legendary Amazing Speaker, which had a 5-foot ribbon.

He keep the 5-foot ribbon, folding it into the smaller speakers. The results, he says, are an amazing amount of “power output” from small speakers and “wider sweet spots.”

He also described how Sunfire’s anti-shake in-wall subwoofer technology helped his products evolve.

“Dealers told me the drywall turned to dust and crumbled,” Carver says of the first generations of in-wall subwoofers.

“Most manufacturers turn down the woofers. I put an actuator that moves in opposition to the woofer.”

“You can really play it loud! It also reduces cabinet vibration in non-in-wall applications so it actually enhances the bass.”


Subscribe to the CE Pro Newsletter

Get the latest news, products and more delivered straight to your inbox.
This entry has been viewed 12692 times.

tags
Subscribe to the CE Pro Newsletter
Subscribe to Email Alerts
Subscribe to the newsletter today! 

tagsThis Article Tagged

tagsNews Feeds

tagsSocial Bookmark
Submit to: , Digg, Delicious, Slashdot, Reddit, MyYahoo!, Google, Technorati, Learn about social bookmarking

Comments

Posted by Kevin S. Ritchey  on  12/28  at  07:09 AM

Where is Bob Carver and how might a simplton such as myself locate the Master? I am the proud owner of three of his previous products (Phase Linear #700, 4000, and 6000...all of which are no longer functional). Unfortunately purchased through Craig’s List. Managed to get the amp functional; the remaining units are toasted enough that I cannot locate the proper ICs, etc. to properly recondition them (ain’t got no parts, man). I spent a whole months income to acquire them (on disability)...what is a proper gentleman to do besides suck it up and admit failure? Already own a Marantz 2325 I purchased new in 1973, but have always craved your equipment. Now I feel like a REAL loser since I cannot repair your other items. Is there any hope left; things have not been good lately?! At the least, thank you for what you have done for my industry (A/V sales).  KSR

n

Posted by Edward Blackwood  on  12/29  at  09:13 AM

I have been working with Dean (the last factory service manager at Phase Linear’s Lynnwood Washington plant) for approximately 20 years. We shared a web site until recently when AOL shut down all AOL websites on October 31, 2008.  An archived copy of our web site is available at: http://web.archive.org/web/20071208055327rn_1/hometown.aol.com/PhaseTek/

Dean has registered a new web site which will be forthcoming in 2009.

Dean and I have factory original new old stock parts to repair most pieces of Phase Linear gear.

Page 1 of 1 comment pages
Post a comment

Name:

Email:

Choose smileys | View comment guidelines

Remember my personal information

Notify me of follow-up comments?

Please answer the question below:

Type the last letter of the word "cable":


Rate this article
You must be logged in to rate articles. Login or register.
  • Currently 0/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5
Average score: 0 / Total votes: 0